How to Use Eyelash Lift & Curl Refill Glue Safely

By Hunt Or Dye Home For Contact Lenses & Hair Dye | Published: 2026-10-27

Category: How-to Guides

Learn the safe steps to apply eyelash lift refill glue for secure, lasting results. Avoid common mistakes and keep your lashes healthy.

Quick Answer

Use eyelash lift & curl refill glue sparingly on the silicone pad or shield, never directly on the lash line, to avoid irritation and ensure a secure bond.

Why Refill Glue Differs from Regular Lash Adhesive

Refill glue for eyelash lifts has a thinner consistency than standard lash extension adhesive. It is designed to reattach the lifted lashes to the silicone rod or shield when you need a touch-up, not for initial application. Using too much can cause the glue to seep onto the skin or into the eye, leading to discomfort or poor lift results.

When to Use Refill Glue vs New Kit

Refill glue is ideal if your lift has relaxed but the shield or rod is still intact and clean. If the silicone pad is damaged or the lift has completely dropped, start with a fresh kit. Refill glue is a maintenance product, not a full replacement for a new lift procedure.

Safe Steps for Applying Eyelash Lift Refill Glue

Prepare the Work Area and Lashes: Clean your lashes thoroughly with an oil-free cleanser and pat dry. Place the silicone shield or rod on a clean surface. Ensure no makeup, oil, or residue remains—this is the most common cause of poor adhesion. Even a trace of oil can weaken the bond, so use a dedicated lash primer if available.
Apply a Tiny Drop to the Shield, Not the Lashes: Dip the tip of a clean applicator or the glue tube nozzle into a single small drop of refill glue. Spread it thinly along the center of the silicone pad where the lashes will rest. Never apply glue directly to your lash line or eyelids. Too much glue can migrate into the eye; if you see excess, wipe it off before placing the shield.
Position the Shield and Wait for Tack: Gently press the silicone pad onto the lifted lashes so they adhere to the glue. Hold for 5–10 seconds without moving. Wait 30–60 seconds for the glue to become tacky before proceeding with the next step. If the shield slips, remove it, clean both lashes and shield, and start again with fresh glue.
Seal and Set Without Disturbing: Once the glue is tacky, avoid touching or brushing the lashes. Leave the shield in place for the recommended time per your lift system (usually 10–15 minutes). Do not use a hair dryer or fan directly on the glue—it can cause premature drying and flaking. Let the glue cure naturally; rapid drying can make the bond brittle.
Remove Gently and Inspect: After the set time, remove the silicone shield slowly from one side. If any lashes stick, apply a drop of sterile water or lash remover to loosen the glue—never pull. Check that all lashes are lifted evenly. If lashes appear uneven, you may need to repeat the process on a small section rather than the whole eye.

Product Facts

Eyelash Lift & Curl Refill Glue 4ml (0501063): Refectocil Eyelash Lift & Curl Refill Glue 4ml is formulated by brand leaders in professional beauty, focusing on easy use and effective results. The thin, precise formula reduces the risk of over-application, making it safer for at-home touch-ups when used correctly.
Eyelash Lift & Curl Refill Glue 4ml (0501063)